Dual piston deadweight testers can greatly enhance a lab?s capability to calibrate wide pressure ranges with the best accuracy. With Freebie and devices under test (DUTs) that have a broad measuring range, calibration can be a lengthy process, as you must change pistons among test points so as to calibrate its entire range.
However, a dual piston deadweight tester is equipped with a high range piston and low range piston, which allows the technician more flexibility and efficiency with regards to calibration. This advancement originates from decades of innovation and customer interaction to find a solution for industry needs.
Formula for pressure calculations
Since the Industrial Revolution, high accuracy pressure measurement is a key requirement in process industries. Pressure measuring instruments like gauges were employed to measure and monitor pressure conditons. They must be calibrated against instruments of an increased amount of accuracy. Deadweight testers (generally known as pressure balances) are high accuracy instruments used in the calibration of electronic or mechanical pressure instruments. The core component of a deadweight tester is really a precisely manufactured piston-cylinder system, onto which a mass load is applied in order to generate the average person test points in a calibration.
Achieve is proportional to the target pressure, that is achieved through optimally graduated masses. The look of the complete calibration system, as well as the precise manufacturing of the piston and cylinder, ensure quality performance with long free-rotation time and low sink rates of the piston. With measurement uncertainties down to 0.002% of reading, deadweight testers are the golden standard in calibration.
A deadweight tester typically includes a single piston-cylinder system. This involves mass sets to be changed so that you can calibrate multiple or wide measuring ranges. This could turn into a cumbersome process, one that requires many resources. In 1953, the entity today referred to as DH-Budenberg pioneered the first dual range piston-cylinder technology with two pistons housed concentrically in one unit. DH-Budenberg was later acquired by WIKA in 2011. The first design included 1/8 in2 (low pressure) and 1/180 in2 (ruthless) pistons housed in a single unit. Utilizing a single mass-set it had been now possible to generate two points of equilibrium at 55 bar (low pressure) and 550 bar (high pressure) respectively. This was followed with the release of ruthless variant which could generate pressure upto 1100 bar.
Explanation dual piston design
The initial dual piston design was largely made of tool roll, and had an accuracy of 0.03 % of the pressure being measured in the typical model and 0.05 % in the high pressure model. In dual piston calibration, the strain on the reduced pressure piston is transferred to the auxiliary piston, which is directly linked to the weight carrier. When correct pressure is obtained, the piston head skirt floats within the reduced range or ?blue band.? To reach high pressure, the pressure is increased and the reduced pressure piston rises until a knife-edge on the bottom flange makes a seal contrary to the low pressure cylinder and acts because the high pressure cylinder. Because the low pressure piston will not contribute to the entire weight of the piston and weight carrier, the weight carrier picks up the auxiliary weight to compensate. When correct pressure is achieved, the piston head skirt floats within the high range or ?red band.?
This iconic, patented DH-Budenberg red and blue band piston-cylinder system was re-engineered later with both piston and cylinder components manufactured from tungsten carbide. With the refinements in pressure generation and piston manufacturing processes, dual ranges are now available up to 1,400 bar with accuracies down to 0.006 % of reading.
These developments in dual piston technology made deadweight testers, such as for example DH-Budenberg?s CPB5800 Hydraulic Pressure Balance, the premier deadweight tester for industrial applications. It really is especially useful for calibrating a transducer with a broad measuring range, while maintaining the high accuracy for testing and calibration. With the use of only a single mass set and calibrating instrument, this technique can automatically switch between multiple test points of high and low pressure, making pressure calibration seamless, efficient and economical.
Note
More info on our pressure balances are available on the WIKA website.