Celeros Flow Technology has injected new life into a heritage pump for a Canadian heavy oil recovery buyer, enabling them to increase production. pressure gauge nuova fima ราคา – a Mather & Platt BB5 – was more than 40 years old and had been topic to numerous post-installation alterations.
Heavy oil deposits are extraordinarily viscous and require the injection of high stress, high temperature steam to enhance fluidity and permit the oil to be pumped to the floor. In order to boost extraction on this project, the shopper needed to extend water temperatures from 90° C to 140° C. However, there have been concerns that the present pump may not be able to ship this requirement. Nozzle loads have been a selected concern. They turned to Celeros Flow Technology model ClydeUnion Pumps, their most popular provider of some 20 years, for help.
Mather & Platt is considered one of a number of heritage pump brands for which Celeros Flow Technology offers full lifecycle support1. Their aftermarket engineering team undertook a radical examination of the quadragenarian Steam Assisted Gravity Drainage (SAGD) boiler feed water pump used in the heavy oil extraction course of. The investigation revealed that the pump had suffered a selection of seal failures over time that had damaged the stuffing field and affected operational efficiency. There had additionally been no maintenance interventions for decades – however the pump had never truly failed.
Says Mike Golds, Global Upgrade and Rerate Programme Manager for ClydeUnion Pumps: “It is testament to the standard of the original pump that it had continued to operate in such harsh circumstances and with no regular upkeep over such an extended period of time. More importantly, it gave us confidence that a thorough overhaul could obtain the specified improvement in efficiency, saving the client the price and misplaced production time that can be related to sourcing and putting in a brand new unit.”
Celeros Flow Technology overhauled the SAGD pump and carried out a mechanical seal upgrade and Plan 23 seal flush to optimize pump performance. In addition, finite factor evaluation was undertaken to verify that the nozzle masses would stand up to the desired temperature increase. As a outcome, the pump is now capable of delivering steam at the greater temperatures required. The seal upgrades guarantee it meets the latest specifications.
Concludes Mike Golds: “We are actually happy with the end result of the SAGD pump improve. It has not solely achieved the specified manufacturing improve for the client, but also offered a more sustainable and cost-effective answer than total pump replacement. Using trendy engineering and analysis, we’ve been able to give the prevailing pump a new lease of life and ensure it’ll continue to carry out properly for many extra years.”
Share