The invention of the pump itself was a major breakthrough for mankind. It significantly simplified the supply of normal water. With growing demands for a well balanced water supply, largely clear of pressure fluctuations, and at the same time increasing demands on the power efficiency of buildings, pumps are actually making their contribution as booster pumps. What their task is, how they function and what pressure switches do in the process is explained briefly and succinctly in this posting.
What are booster pumps necessary for?
A booster pump increases low water pressure and, with that, improves the flow rate. It provides an extra boost to create the water pressure to the required level. Booster pumps are often used in pipelines to increase the pressure therefore to go the liquid along to another pump, and in addition for pumping in residential houses or large commercial buildings. An expansion vessel can extend a pressure booster system. By using this expansion vessel, the water pressure is additionally stabilised and thus improved.
Tenacious functioning
The figure gives a synopsis of the various measuring points within a pressure booster system:
1 Input pressure ? Pressure
2a Dry run protection ? Pressure
2b Dry run protection ? Level
3 Output pressure ? Pressure
4 Pump performance ? Differential pressure
How does a booster pump work?
Booster pumps are selected predicated on application demands. Rather than selecting one large pump, consider selecting multiple pumps with smaller horsepower. Booster pumps have an impeller that moves water that will come in through the inlet and exits through the outlet. A motor makes the impellers spin. The pumps differ in how they draw the water in and push it out. A number of them work with a spinning propeller, others use an oscillating diaphragm or other pump principles.
What do mechanical pressure switches in booster pumps do?
The mechanical pressure switches in booster pumps are employed for the direct control/monitoring of safety functions so as to protect pumps with insufficient input pressure against dry running. An example of it is the WIKA PSM-520 pressure switch.
Just how do mechanical pressure switches work?
The pressure component of the switch is a resilient bellow which works against a spring mechanism having an adjustable pre-load force. On the spring mechanism there exists a contact arm for actuating the change-over switch contact. The switch is actuated as soon as the force generated by the pressure in the pressure element is greater than the set pre-load force.
Note
Further information on the various measurement solutions which you can expect you for pumps and systems are available on the WIKA website. For those who have any questions, your contact will gladly help you.
Also read our articles
Mechanical pressure switches: How does one set the switch point?
Mechanical vs. electronic pressure switches: Functionality
Further blogs on mechanical pressure switches